%
<T-001+A>(DECO Sigma 20 INCH - CHANNEL 1);
( PATH 1 )
( CUSTOMER: 		)
( DRAWING NO.: 		)
( MATERIAL: 		)
( DATE: 21.10.2008		)
( NAME: 			)
M9000;
(ENTERING TOOL GEOMETRIES)
G10 P20001 X0 Z0 Y20.47244;
G10 P10001 X0 Z-0.90551 R0 Q0 Y-0.23622;
;
(*** INITIALIZATION ***) ;
(GLOBAL VARIABLE MEMORISATION) ;
G900 A101 B0.8 C0.002 D1.9 E0 H1 I0.11811 J5000 K0.98 M0 S15 V0 W0.7874 Y0 Z0.004;
(A: CUTOFF TOOL NO)
(B: BARSTOCK DIAMETER)
(C: INITIAL FEED RATE)
(D: PART LENGTH)
(E: ADD. RE-LOAD)
(H:BUSHING TYPE : 0=FIXED 1=ROTATING)
(I: CUTOFF TOOL WIDTH)
(J: S1 RPM FOR INITIAL FACE OFF)
(K: DIST. PART PICKUP)
(M: PICKUP COLLET GEOM.)
(S: CUTOFF TOOL ANGLE)
(V: TYPE OF EJECTION : O=JAWS 1=EXTRACTOR + BASKET 2=JAWS + EXTRACTOR)
(W: DISTANCE PICKED UP BY THE JAWS)
(Y: ADD. MAT. FOR FACE OFF IN M'OPS)
(Z: ADD. MAT. FOR FACE OFF IN C'OPS)
;
G28 G91 X0 G90 (RETURN TO REF X1) ;
M8;
G4 X1;
M103 S1=5000;
G910;
M9001;
M9002;
(*** LOOP START ***) ;
N1 M120;
(*** TEST END OF BAR ***) ;
G913;
M9003;
(*** FEED NEW PART ***) ;
G912;
(*** RETRACT CUTOFF TOOL ***) ;
G0 G91 Z0.01969;
G0 G90 X1.043;
(*** CUT WITH MAINWORK GANG 1 ***) ;
;
(******)
(PART PROGRAM)
(******)
;
(*** ORIENT CUTOFF TOOL ***) ;
G0 Y0 M103 S1=5000 T0101;
M9200;
(*** PREPARATION FOR CUTTING ***) ;
M418 (SYNCHRO S1-S4) ;
G0 X1.043;
G0 Z-1.9004;
M9201;
M9202;
(*** CUTOFF, CUTOFF FOLLOWUP ***) ;
G1 X0.09843 F0.00197 M81 (M81: BARFEEDER SBF-532 THRUST LENGTH CHANGE) ;
G1 X-0.00787 F0.00118;
M9203;
(*** END OF CUTOFF ***) ;
G1 X-0.06329 F0.00197 (APPROXIMATE VALUE OF HEIGHT OF ANGLE X-0.06329) ;
(*** LOOP END ***) ;
M121;
M9204;
(*** AUXILIARY FUNCTIONS ***) ;
(M1105);
(M4105);
M891;
M893;
M9;
M46;
M105;
M9205;
(*** UNCONDITIONAL STOP. MAKE AN ATTEMPT START ***) ;
M122;
(*** RESET FUNCTIONS ***) ;
M8;
M103 S1=5000;
M9206;
(*** END OF PROGRAM. RETURN BEGINNING OF CYCLE ***) ;
M99 P1;
M2;
<T-001+B>(DECO Sigma 20 INCH - CHANNEL 2);
( PATH 2 )
( CUSTOMER: 		)
( DRAWING NO.: 		)
( MATERIAL: 		)
( DATE: 21.10.2008		)
( NAME: 			)
M9000;
(ENTERING TOOL GEOMETRIES)
G10 P20009 X3.62205 Z0 Y0;
G10 P10009 X0 Z-0.7874 R0 Q0 Y0;
G10 P20010 X0 Z0 Y0;
G10 P10010 X0 Z0 R0 Q0 Y0;
(*** INITIALIZATION ***) ;
M110;
M161;
M85;
G28 G91 X0 G90 (RETURN TO REF. X4) ;
G28 G91 Z0 G90 (RETURN TO REF. Z4) ;
M9001;
(*** COMPUTE BACKWORK ZERO OFFSET ***) ;
G921;
M9002;
(*** LOOP START ***) ;
N1 M120;
(*** Z4 ZERO OFFSET ***) ;
G55;
M9003;
(*** CUT WITH MAINWORK GANG 4 ***) ;
;
(******)
(PART PROGRAM)
(******)
;
(*** EJECT PART ***) ;
G923 Z1;
G0 X0;
M165 (PART DROP-OFF IN THE CHUTE) ;
G4 X1;
G28 G91 X0 G90 (RETURN TO REFERENCE X4) ;
M404 S4=5000;
M9200;
(*** APPROACH PICKOFF SPINDLE ***) ;
G54 (PART PICKOFF ZERO OFFSET) ;
(TOOL T10 PICKOFF SPINDLE) ;
G0 Y17.91339 Z0.19685 T1010;
M170 (Z4 TORQUE LIMIT) ;
M9201;
(*** PART PICKOFF ***) ;
G924;
G4 X0.1;
M172 (SERVO-LAG CHECK  Z4) ;
M410;
M173;
M9202;
M9203;
(*** RETRACT AFTER PART PICKOFF ***) ;
G1 G91 Z0.07874 G94 F78.74 (CHECK CUTOFF TOOL) ;
G95 G90;
G4 X0.1;
M172;
M173;
M171;
G28 G91 Z0 G90 (RETURN TO REF. Z4) ;
M405;
(*** LOOP END ***) ;
M121;
M9204;
M9205;
(*** UNCONDITIONAL STOP. MAKE AN ATTEMPT START ***) ;
M122;
M9206;
(*** END OF PROGRAM. RETURN BEGINNING OF CYCLE ***) ;
M99 P1;
M2;
%