Tips and Tricks related to TB-DECO

Chamfering a cross hole with the tip of the bit using the C axis

(e.g. form bore bit) and to save on a machining station it is possible to chamfer a cross hole with the tip of the bit using the C1 axis. Example of a Ø 3 transverse hole:

Read more

Compensating the plate radius

A major function offered by the TB-DECO is the use of plate radius compensation in turning operations. The main advantage is being able to use standard tools commercially available on the market, especially…

Read more

Counter-operation milling using gang 2

The exceptional versatility of the TB-DECO and vast kinematics available for the DECO machines allow the operators to perform very clever operations...In this particular case, operation milling is impossible…

Read more

Cross tapping with a thread milling cutter

Production problems encountered by conventional tapping - such as the use of materials which are very difficult to machine, tapping blind holes with special machining requirements, i.e. flat-bottom holes…

Read more

Energy optimisation on MultiDECO and MultiAlpha

It will be necessary to go back a little in time to understand the usefulness of this function.What user of conventional multi-spindle machines does not keep at the back of his mind the fact that a roller…

Read more

Extraction position on the MultiDECO

With the latest TB-DECO version, the extraction position (variable #3013) is no longer limited to the machine reference position.

Read more

Discover Tornos SwissNano!

Tips and Tricks

Contact

TORNOS S.A.
Rue Industrielle 111
CH-2740 MOUTIER
Suisse
Tel. +41 (0)32 494 44 44
Fax +41 (0)32 494 49 03

E-Mail