Tornos - MultiChucker Robotic or powered loading

To be able to offer the maximum amount of flexibility, a robot fitted in place of the slide in position 1 now offers easier loading for different types of parts
Swiss type machine high precision turning numerically controlled machine cam machine tools single spindles monospindles multiple spindles multispindles high precision parts lathes NC numerically controlled multi-spindles lathe multispindles machining
0

MultiChucker

Automatic, NC multispindle lathes
Robotic or powered loading
Capacity: 4-32 (34) mm (with preparation)
Multi Spindle
•  SAS-16.6
•  MULTIDECO 20/6b
•  MULTIDECO 20/8b
•  MULTIDECO 32/6i
•  MultiAlpha 6x32
•  MultiAlpha 8x20
•  MultiSigma 8x24
•  MultiChucker
•  Options Multi Spindle
MultiChucker
   

Robotic Loading

The requirements in terms of chuckers are continuously evolving. Both profiles and dimensions are changing. To be able to offer the maximum amount of flexibility, a robot fitted in place of the slide in position 1 now offers easier loading for different types of parts. This also allows angular positioning of the parts.

One of the other advantages when using a robot is that there is the option to unload parts in a controlled way, as far as the machining time will allow. The "robotic loading" chucker concept can be adapted for use with the entire MultiSigma and MultiAlpha range.

Example of a solution :
A vibrating bowl, which guarantees a predefined autonomy, offers up the parts to the robot placed in position 1, which is within the machining zone. The robot grips the part and loads it inside the spindle.
  • Technical information :
  • Minimum loading cycle time : 4.5 seconds.
  • Clamping diameter, minimum : 4 mm to maximum : 55 mm
  • Hydraulic or mechanical clamping with gripper or chuck.
  • Angular orientation of the parts possible.
  • Several options available : tracing, palletization, ejection of checked parts.
  • Adaptable to Dm1, Dm2, 2x4 machines.


MultiChucker

Powered Loading

This chucker is an economic solution for large volumes of parts. So as to obtain maximum performance, a motorized system, which allows rapid loading of a specifically defined part, has been fitted in place of the slide in position 1. This system is designed for parts requiring cylindrical revolution, which do not need any angular orientation. The "powered loading" chucker concept can be adapted for use with the entire MultiSigma and MultiAlpha range, and the MultiDECO 32/6 i.

Clamping by chuck :
The use of a chuck is less demanding in terms of the quality of the billets, thanks to its 2 mm stroke. The hydraulic control allows linear adjustment of the clamping force.
  • Technical information :
  • Minimum loading cycle time : 4 seconds.
  • Clamping diameter, minimum : 4 mm to maximum : 55 mm
  • Hydraulic or mechanical clamping with gripper or chuck.
  • Several options available : tracing, palletization, ejection of checked parts.
  • Adaptable to Dm1, Dm2, 2x4 machines.
  • This concept is applied for parts where the blanks are parts which require cylindrical revolution, and do not need any angular orientation.

MultiChucker


THINK PARTS THINK TORNOS

Home   Company   Applications   Products    Technology   Investor   News    Contacts    Download   Site Map  
privacy    -    copyright-disclaimer © 1997 - 2010   -   Tornos
ascl.com
 
 Think Parts Think TORNOS
 Tornos
Think Parts Think TORNOS
 TORNOS SA
Rue Industrielle 111
CH-2740 Moutier
Switzerland
 Tel.: +41 (0)32 494-4444
Fax: +41 (0)32 494-4903
www.tornos.com
 Tornos
ENGLISH
FRANÇAIS
DEUTSCH