| DECO 7/10a |
|
| Technical characteristics |
|
| Sliding headstock (axis Z1) (+C1 optional) |
|
| Max. bar passage |
ø 10 mm |
| Max. length of parts depending on type of guide bush |
60/90 mm |
| Programmable spindle rotation speed |
100-16000 rpm |
| Positioned indexing and stop, increments |
0.1 degree |
| Max. spindle power |
1.1 (3.7) kW |
| Guide-bush holder (X1/Y1) (X2/Y2) |
|
| Number of tools in the guide bush |
2 x 4 |
| Tool section |
8 x 8 mm |
| Number of cross millers / drillers in the guide bush |
4 |
| Programmable rotation speed |
100-12000 rpm |
| End unit (X3/Z3) |
|
| Max. number of tools at end |
3 |
| Programmable rotation speed |
100-12000 rpm |
| Counter spindle and back-operation (X4/Z4) (+C4 optional) |
|
| Max. diameter clamping capacity |
10 mm |
| Length of standard parts |
60 mm |
| Programmable rotation speed |
100-12000 rpm |
| Positioned indexing and stop, increments |
0.1 degree |
| Max. number of back-operations |
4 |
| Number of fixed or turning spindles |
4 |
| Programmable spindle rotation speed |
100-9000 rpm |
| PNC-DECO parallel numeric control |
|
| Number of simultaneous axes |
all axes |
| Number of interpolated axes |
all axes |
| Machine in three versions |
5 axes |
|
7 axes with counter-spindle |
|
9 axes with combined system
and counter-spindle |
| Conforms to CE/CEM standards |
|
