| DECO 20a |
|
| Technical characteristics |
|
| Sliding headstock (axis Z1) (+C1 optional) |
|
| Max. bar passage |
ø 20 (25,4) mm |
| Length of parts - guide bush turning |
200 mm |
| Programmable spindle rotation speed |
100-10000 rpm |
| Positioned indexing and stop, increments |
0.1 degree |
| Max. spindle power |
3.7 (5.5) kW |
| Guide bush holder (X1/Y1) (X2/Y2) |
|
| Number of tools in the guide bush (fixed or turning) |
2 x 5 |
| Tool section |
16 x 16 mm |
| Number of cross millers/drillers in the guide bush |
4 |
| Programmable rotation speed |
100-8000 rpm |
| Max. power of turning spindles |
1.5 (2.2) kW |
| End unit (X3/Y3) |
|
| Max. number of end tools (fixed or turning) |
4 |
| Programmable rotation speed |
100-6000 rpm |
| Max. power of turning spindles |
1.5 (2.2) kW |
| Counter-spindle and back-operation (X4/Y4/Z4) (+C4 optional) |
|
| Max. diameter clamping capacity |
20 (25.4) mm |
| Standard length of parts |
200 mm |
| Programmable rotation speed |
100-10000 rpm |
| Positioned indexing and stop, increments |
0.1 degree |
| Max. number of back-operations |
7 |
| Number of fixed and turning spindles |
7 |
| Programmable spindle rotation speed |
100-8000 rpm |
| Max. power of turning spindles |
1.5 (2.2) kW |
| PNC-DECO parallel numeric control |
|
| Number of simultaneous axes |
all axes |
| Number of interpolated axes |
all axes |
| Conforms to CE/CEM standards |
|
