Simplification and adaptation to all requirements Application :Application:This device is intended for use with through centre coollant drills and is particularly suitable for drilling to a depth of approximately 40 times the diameter. It allows 4 tools to be fed independently and alternatively. When the pump engages, a converter selects a rotation speed which corresponds to the flow and adjusts the pressure accordingly.A The flow and pressure are therefore dependant on the drilling tool. These parameters are adjusted automatically and independently on each tool every time the pump is switched on. Note :As the oil is subjected to a laminating effect during drilling, the oil temperature increases. Also, we recommend adaptation of a cooler which will maintain a level to approximately 23 degrees (see, for example, DECO Magazine 14 option 5270 for DECO 2000 20 and 26 mm versions).Compatibility :This device is option equipment on all DECO machines. It can be retrofitted onto machines which are already in service. However, if you are interested, please consult us for a compatibility analysis of the equipment on your machine. There are some limitations on use.
THINK PARTS THINK TORNOS ascl.com | |||||||||||||||||||||||||||||||
|
|
 |
 |
|
|
TORNOS SA Rue Industrielle 111 CH-2740 Moutier Switzerland |
Tel.: +41 (0)32 494-4444 Fax: +41 (0)32 494-4903 www.tornos.com |
|