Option 5465

Device for recovering parts using the guide bush

Compatibility :
DECO 13bi

• Options Single Spindle
• Options Multi Spindle
• Single Spindle
• Multi Spindle
• Bar Loaders

Application

This device recovers parts by way of the guide bush for the DECO 13b and DECO 13bi machines. It has been designed to recover single parts and requires no counter-operations.

The collection of a part by the counter-spindle and feeding it to the conventional recovery trough has wasted a lot of time. This new unit picks up the part that is being cut through the guide bush, thereby dispensing with the conventional form of pick-up.

This unit is also quite capable of recovering very small parts or parts, which cannot be picked up by the counter-spindle on account of their shape.

Device for recovering parts using the guide bush

Comment

It is essential to disengage axes X2/Y2/Z2 before activating the recovery device. If they are not disengaged then a collision will occur between the latter and tool positions T31-T33. There are two ways to disengage the X2/Y2/Z2 system, i.e.:

Disengage X2 and Z2 where there are no tools on positions T31 to T33.
Disengage X2/Y2/Z2 if tools are present on T31 to T33. As regards cutting a non-supported part,
a dog point will be located on the cutting face.

This device can quite easily be adapted and dismantled, depending on the parts being machined.

Characteristics :

Types of control :	M functions M160 advances from the recovery device M161 goes back from the recovery device
Travel :	250 mm
Types of parts :	Minimum diameter : 1 mm Maximum diameter : 16 mm Minimum length : 1 mm Maximum length : 100 mm

THINK PARTS THINK TORNOS

Home Company Applications Products Technology Investor News Contacts Download Site Map

TORNOS SA
Rue Industrielle 111
CH-2740 Moutier
Switzerland

Tel.: +41 (0)32 494-4444
Fax: +41 (0)32 494-4903
www.tornos.com

ENGLISH
FRANÇAIS
DEUTSCH