Produce complex parts with fewer adjustments and less downtime
Whether you’re machining simple or highly complex parts, in small or large runs, Tornos offers modern, Swiss-engineered solutions.
Your project deserves the right solution
Ready to explore the right machining solution for you? Book a personalized demo or request a non-binding quote — our specialists will make it simple.
Why Tornos?
From the first automatic lathe in 1872 to today’s most advanced machining solutions, Tornos has been the pioneer in Swiss-type technology.
Complete portfolio
From entry-level to highly advanced machines, one partner for all your needs.
Two technologies
From single to multispindle machines, achieve faster cycles with the same Swiss precision.
Intuitive programming for everyone
With TISIS you get easy-to-use templates that simplify complex, dependent operations.
| Machine Feature | Swiss DT | SwissNano | Swiss GT | Swiss XT | EvoDECO | MultiSwiss |
| Max. bar capacity | Up to 38 mm | Up to 10 mm | Up to 32 mm | Up to 32 mm | Up to 32 mm | Up to 32 mm |
| Gangs | 2 | 2 | 2 | 3 | 4 | 7 |
| Axes | 5 & 6 linear, 2 C, 1 B | 6 linear, 2 C | 6 linear, 2 C, 1 B | 8 & 9 linear, 2 C, 1 B | 10 linear, 2 C | Up to 28 linear, 9 C |
| Total number of tools | Up to 35 | Up to 22 | Up to 46 | Up to 42 | Up to 27 | Up to 31 |
We help you produce perfect high-end connectors faster with fewer adjustments
Reduce setup time, stabilize production earlier and increase output per machine. Tornos solutions combine machine performance, programming support and process control to improve productivity where it matters: on the shop floor.
Stabilize your process from the start
Closed-loop manufacturing automatically applies measurement data to tool corrections.
- Achieve target tolerances from the second part
- Maintain consistent quality without manual intervention
- Reduce scrap during ramp-up
Control chips to avoid downtime
Active Chip Breaker (ACB) ensures controlled chip formation across materials.
- Eliminate machine stops caused by chip entanglement
- Improve process reliability
- Extend tool life and reduce maintenance
Program faster, with fewer errors
TISIS simplifies programming and reduces dependency on expert operators.
- Guided ISO programming with built-in assistance
- Reduced collision risk
- Faster transition from program to production
Maximize machining efficiency
Tornos platforms are designed to remove material faster and reduce cycle time.
- Multiple tools engaged simultaneously (EvoDECO or Swiss XT)
- High material removal rates with stable precision
- Optimized kinematics for complex parts
Proven impact on production
- Reach tolerance from the first parts and stabilize production earlier
- Reduce scrap rates during setup and production
- Increase output per machine and per m²
- Maintain consistent quality across long production runs
Example: multispindle technology can increase productivity significantly while reducing cost per part and floor space requirements.
Designed for demanding applications
Tornos solutions are used where precision, repeatability and reliability are critical:
- Medical and dental components
- Micromechanics and watchmaking
- Electronics and connectors
- Automotive and high-volume production
Produce micro-precision connectors with stable output
Miniaturized connectors require tight tolerances, clean surface finishes, and repeatability over long runs. Any variation impacts performance and assembly.
SwissNano gives you the control needed for very small diameters. Its thermal stability and rigid structure ensure consistent precision from the first part to the last. This is critical for high-frequency or micro-electronic connectors where deviations are not acceptable .
MultiSwiss addresses volume. With up to 8 spindles, you produce multiple parts simultaneously while maintaining identical quality. In typical applications, cycle time can drop from 150 seconds to 35 seconds, reducing cost per part by up to 35% .
Talk to our experts to evaluate your application and identify the best solution for your production.
Protect your connectors and sensors
Connector and sensor housings must meet strict requirements on dimensions, surface finish, and repeatability. Any deviation affects sealing, protection, and long-term reliability.
Swiss GT gives you the flexibility to handle a wide range of geometries. With up to 40 tools and the option of a B-axis, you produce complex housings in a single setup while reducing cycle time and handling .
Swiss DT is designed for efficient, stable production. Its modular tooling and fast setup allow you to switch quickly between part references while maintaining consistent quality across batches .
Talk to our experts to evaluate your application and identify the best solution for your production.
Take charge of rising demand
Demand for connectors is increasing, driven by electrification and higher component density. This puts pressure on cycle time, process stability, and consistency.
EvoDECO is built for maximum productivity on complex parts. With up to four independent tool systems and simultaneous operations, you reduce cycle times while maintaining tight tolerances. This allows you to produce more parts per hour without sacrificing quality .
Swiss XT combines performance with flexibility. Its multi-tool configuration and powerful spindles enable efficient machining of a wide range of connector designs, from simple to complex, in a compact footprint
Talk to our experts to evaluate your application and identify the best solution for your production.