MultiSwiss 6x16 Chucker

Your automation solution

The MultiSwiss 6x16 Chucker is the standard Tornos chucker solution. Parts can be loaded using a vacuum: the part is blown into the machining area in a device that turns it 90 degrees in front of position five; then, thanks to the numerical axis, the spindle picks up the part and machining starts in a clockwise direction. The part is then extracted by the back spindle. A vibrating bowl with a selector has been specially adapted, and the part is blown towards the outside of the machine. The machine can be reconverted for machining from bar stock by simply removing the simple internal turning system; this approach works well for parts that do not require angular positioning and have dimensions up to 15 mm.